Keithley 4200A-SCS Reference Manual

Section
13: LPT library function reference Model 4200A-SCS Parameter Analyzer
Reference Manual
13-50 4200A-901-01 Rev. C / February 2017
tstdsl
This command deselects a test station.
Usage
tstdsl(void);
Details
To relinquish control of an individual test station, a new test station must be selected using tstsel
before any subsequent test control commands are run.
The tstdsl command has the same effect as the tstsel(0) command.
tstdsl is not required for use in a user test module (UTM).
Example
tstdsl( ); /* Disables test station.*/
Also see
tstsel (on page 13-50)
tstsel
This command enables or disables a test station.
Usage
tstsel(int x);
x
The test station number: 0 or 1
Details
tstsel is normally called at the beginning of a test program.
tstsel(1) selects the first test station and loads the instrumentation configuration.
The tstsel command is not required for use in a user test module (UTM).
Also see
tstdsl (on page 13-50)

Keithley 4200A-SCS Specifications

General

Brand	Keithley
Model	4200A-SCS
Category	Measuring Instruments
Language	English