Keithley 4200A-SCS Reference Manual

Section
11: System administration Model 4200A-SCS Parameter Analyzer
Reference Manual
11-2 4200A-901-01 Rev. C / February 2017
Default user accounts
There are two preconfigured Windows
®
user accounts on the 4200A-SCS. You can also create a
unique user account.
You can use any user account to access all Clarius
+
applications and applicable non-Keithley
software tools.
The kiuser account logon does not require a password.
The kiadmin account logon password is kiadmin1.
Create new user accounts
You can create unique Windows
®
user accounts for each 4200A-SCS user. This enables you to
customize the behavior of a 4200A-SCS without affecting its behavior for other users. It also provides
additional data protection and privacy, because each user can log onto the 4200A-SCS using a
unique logon name and password.
Setting up multiple Windows
®
user accounts is an advanced system administration procedure that
should be performed only by a knowledgeable Windows system administrator.
To set up a new user account:
1. Log in as an administrator.
2. In Windows, select Start > Control Panel > User Accounts and Family Safety > User
Accounts.
3. Select Manage another account.
4. Select Create a new account.
5. Select a name and account type as appropriate for your system. The account must be set up as
an administrator.
6. Select Create Account.
7. Log on using the new account and set up the desktop and other elements of the new profile.
8. Select Start> All Programs > Keithley Instruments > Initialize New User to configure Clarius
+
for the new user.
Initialize New User must be run each time a new user account is created.

Keithley 4200A-SCS Specifications

General

Brand	Keithley
Model	4200A-SCS
Category	Measuring Instruments
Language	English