Keithley 4200A-SCS

Index
Model 4200A-SCS Parameter Analyzer
Reference Manual
Index-4 4200A-901-01 Rev. C / February 2017
Preamplifier • 2-7
Preamplifier local sense • 2-7
prober • F-1
prober or test fixture bulkhead connectors • 5-16
recommended cables • 2-18, 2-22
recommended cables (IEEE-488) • 2-22
scheme settings • A-12
SMU • 2-4, 2-6
SMU circuit COMMON • 2-12
SMU local sense • 2-5
SMU source-measure • 2-14
SMU/Preamplifier source-measure • 2-17, 3-13
source-measure, basic • 2-1
switch matrix • A-7
mainframe control • A-7
mainframes • A-7
preamplifier matrix card • A-9
recommended matrix cards • A-2
typical SMU matrix card • A-7
typical interlock • 2-21
connection compensation • 5-32
connection compensation, enable • 5-34
connectors
4200-SMU and 4210-SMU • 2-15, 3-12, 3-26
constants, editing • 6-293
Contamination and humidity • 12-13
control service request - Data Ready • 9-45
control types (KULT) • 6-125
controlling
LLEC from an ITM • 5-40, 5-41
probe station
Test descriptions • F-17
RPM switching • 5-9
Coordinate System dialog box • G-11
copy
library • 8-9
console • 9-5
Library Information Editor • 6-321
Module list box • 8-37
Test dialog box • 6-150
create_dt utility code • 8-68
creating
analysis formula • 6-291
debug task • 8-66
project prompts
dialog box test examples (KULT) • 8-72
end of test announce (KULT) • 8-72
dialog boxes • 8-70
Project prompts overview • 8-70
user module • 6-347
Winulib user-library reference
AbortRetryIgnoreDialog user module • 6-345
regression formula • 6-291
site definition and defining a probe list • G-15
user accounts • 11-2
user library • 8-16
user module • 8-16
VSweepBeep user module by copying • 8-37
crosshair example • 6-240
crosshairs • 6-240
C-t measurements • B-20
c-t test • 4-71
CtSweep590 user module • B-20
CtSweep82 user module • D-22
current
bias forcing function • 6-33
list sweep forcing functions settings • 6-35
measure ranges for PMU with RPM • 6-80
measurement name • 6-49
source operating boundaries • 3-6
specify measurement range • 6-44
step forcing function settings • 6-31, 6-39
Current Linear Sweep operation mode • 6-34
Current Step operation mode • 6-39
Current Sweep operation mode • 6-34
Cursor attachment method options • 6-221
customize
abort options • 6-326
customize view • 6-326
environment preferences, define • 6-323
execution preferences, define • 6-325
graph defaults • 6-326
messages display option • 6-326
customize user test module (UTM) • 8-43
Copy test example • 8-47
module description, change • 8-51
new UTM • 8-27
Open KULT • 8-44
Open the • 8-46
parameter name, change • 8-50
RdsonAvg user module • 8-49
user library, KI42xxulib • 8-45
user module code • 8-50
customize view • 6-326
C-V Analyzer signal paths • A-21
C-V linear staircase sweep • B-10, C-6, D-19, D-22
C-V measurement basics • B-1, C-2
C-V measurements • B-1, C-2
C-V projects • 4-35
C-V pulse-sweep measurements • B-24
C-V sweep measurements • B-10, B-30
c-v test • 4-70
cv-10 pF test • 4-75
cv-cap test • 4-105
cv-capacitor test • 4-40
cv-diode test • 4-105
cv-gd test • 4-91
cv-nmosfet test • 4-105
CvPulseSweep590 user module • B-24