Keithley 4200A-SCS - Page 759

Section
9: Keithley External Control Interface (KXCI) Model 4200A-SCS Parameter Analyzer
Reference Manual
9-48 4200A-901-01 Rev. C / February 2017
EC
This command sets the condition to exit the test if compliance is reached.
Usage
EC A
A
Action on compliance:
• Off (do not exit if compliance is reached): 0
• On (exit if compliance is reached):
1
Example
EC 1
This command enables exit on compliance.
Also see
None
EM
This command switches between 4145 Emulation and 4200A command sets.
Usage
EM A,B
A
Mode:
• 4145 Emulation: 0
•
4200A: 1
B
Which sessions:
• This session only: 0
• This and all subsequent sessions (writes to KCon file):
1
Example
EM 0,1
This selects the 4145 Emulation command set permanently.
Also see
None