NXP Semiconductors KL25 Series - Page 311

19.31.6 Claim TAG Set Register (MTB_TAGSET)
The Claim Tag Set Register returns the number of bits that can be set on a read, and
enables individual bits to be set on a write. It is hardwired to specific values used during
the auto-discovery process by an external debug agent.
Address: F000_0000h base + FA0h offset = F000_0FA0h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
TAGSET
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
MTB_TAGSET field descriptions
Field Description
31–0
TAGSET
Hardwired to 0x0000_0000
19.31.7 Claim TAG Clear Register (MTB_TAGCLEAR)
The read/write Claim Tag Clear Register is used to read the claim status on debug
resources. A read indicates the claim tag status. Writing 1 to a specific bit clears the
corresponding claim tag to 0. It is hardwired to specific values used during the auto-
discovery process by an external debug agent.
Address: F000_0000h base + FA4h offset = F000_0FA4h
Bit 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
R
TAGCLEAR
W
Reset
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
MTB_TAGCLEAR field descriptions
Field Description
31–0
TAGCLEAR
Hardwired to 0x0000_0000
Chapter 19 Micro Trace Buffer (MTB)
KL25 Sub-Family Reference Manual, Rev. 3, September 2012
Freescale Semiconductor, Inc. 311