Operating temperature 0 °C to +45 °C
Charging unit
Product safety Plug-in power pack in accordance with EN 60950
Power supply
Charging unit: 230 V AC plug-in power pack
Output voltage/current: approx. 5 V/approx. 200 mA
Charging time, first-time use approx. 16 hours
Quick charge Mobile unit battery: approx. 5 hours
Trickle charge Stand-by battery approx. 20 hours
Displays for charging procedure LED
12.9.4 Hicom cordless 150 E system number
The radio code of the Hicom cordless 150 E system is used to identify the beacon in the air and
consists of the following:
a system-specific part
the number of the base stations.
This makes it possible to synchronise the mobile telephones which are logged onto the system.
The system-specific part = Hicom cordless 150 E system number consists of EIC (European Installers
Code), FPN (Fixed Part Number) and FPS (Fixed Part Subnumber).
The system number of the SLMC8 is issued by the factory, is unique to each board and
cannot be changed on the board.
When an SLMC8 board is started up in a non-CMI system, the Hicom cordless 150 E system number
is transferred to Hicom 150 E OfficePro and transmitted via the base station.
If the system already has a Hicom cordless 150 E system number, this is transmitted.
The system number can be administered using Hicom Assistant E.
12.9.5 Base station features
Base station
10 carrier frequencies each with 12 transmit and 12 receive time slots based on DECT
(in Hicom cordless 150 E Version 1 only 6 time division multiplex channels are used)
Software interface to system: CorNet-T
Radio
Hardware interface to system: 1 U
P0/E
connection with 4 B channels
Remote supply via U
P0/E
interface
Hicom 150 E Office Rel.1.0 Service Manual - 12 Cordless Multicell Integration CMI
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_12.htm (42 of 45) [06/04/2000 13:05:57]
To Next Page
Loading...
