Siemens Hicom 150 E Office - Hicom 150 E Officecom; Hicom 150 E Officeone; Hicom 150 E Officepoint; Hicom 150 E Officepro

Figure 2-8 Hicom 150 E OfficeOne system environment
The existing S
0
interfaces can be used as follows:
Option 1:
S
0
(1) for connecting an S
0
terminal (not fed from the system!)
S
0
(2) for use as digital trunk circuit
Option 2:
S
0
(1) for use as digital trunk circuit
S
0
(2) for use as digital trunk circuit
2.5 System-specific capacity limits
Relevant systems
Hicom 150 E OfficePro, consisting of a basic cabinet and expansion cabinet(s), each with 6
slots for peripheral boards.
Hicom 150 E OfficeCom, fully configured
Hicom 150 E OfficePoint, fully configured
Hicom 150 E OfficeOne
Capacity limits
Table 2-1 Hicom 150 E Office - system-specific capacity limits
Maximum system values OfficePro OfficeCom OfficePoint OfficeOne
Telephones (total)
1
:
250 92 28 12
optiset E telephones
250
2
48 16 8
Hicom 150 E Office Rel.1.0 Service Manual - 2 System data
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_2.htm (9 of 13) [06/04/2000 13:02:34]