Recall The recall time for transferring calls to UCD groups is longer than for other
extensions.
Configuration options
This feature is not configured!
7.2.24 Silent Monitoring
Definition
An authorised subscriber can override a call in progress at any internal extension without the other
party noticing anything.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x _ _
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 _ _
Dependencies/Limitations
Subject Dependency/Limitation
Silent Monitoring For USA only.
Silent Monitoring The call can only be overridden by means of a code and not via a menu (*944 +
extension number).
Signalling The call is not signalled at the extension which has been overridden (no display,
no alerting tone, no sound).
Configuration options
The feature can be configured using:
Hicom Assistant T
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure silent monitoring
*9531994
2. 22-19-3 => System Options - Monitoring:
Performing Feature Check
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (34 of 48) [06/04/2000 13:09:59]
To Next Page
Loading...
