Siemens Hicom 150 E Office - Extensions for Internal S0 Stations

Connecting the S0 with a Mini-Western jack
S
0
terminals cannot be connected directly to the Mini-Western jack of the STLS using the cables
supplied. A socket with crossed cables must first be installed, see Figure 5-2.
Figure 5-1 Wiring example for Mini-Western jack assignment
Figure 5-2 Wiring and ranges for S
0
bus jacks
5.2.8.4 Extensions for internal S0 stations
The extension must be entered in the codes for the internal stations.
Hicom 150 E Office Rel.1.0 Service Manual -
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_5fc.htm (8 of 9) [06/04/2000 13:07:42]