Siemens Hicom 150 E Office - Environmental Conditions; List of Documentation; Table 2-3 List of Available Documentation for Hicom 150 E Office

2.7.3 Environmental conditions
Operating conditions (electrical)
Operating limits
Room temperature: + 5 to + 40 ºC
Absolute humidity: 2 to 25 g H
2
O/m
3
Relative humidity: 5 to 80%
System ventilation is by convection only. Forced ventilation is not necessary.
Caution
The system must not be exposed to heat generated either by direct sunlight or heaters
(due to the danger of local increases in temperature).
Systems on which condensation has formed must be dried before startup. Under no
circumstances may a system on which condensation has formed be started.
Operating conditions (mechanical)
The system was designed primarily for stationary use.
2.8 List of documentation
Table 2-3 List of available documentation for
Hicom 150 E Office
(date: 28.05.98)
Documentation Order number Medium
ED = elec. doc.
PD = paper doc.
eSHB Hicom 150 E OfficePro Release 1.0 P31003-M1530-M103-*-7620 ED
SHB Hicom 150 E OfficePro Release 1.0 A31003-M1530-M000-*-7620 PD
System Description
Hicom 150 E Office Release 1.0
A31003-M1530-X100-*-7618 PD
Service Instructions for
optiset E terminals
A31003-E8000-A100-*-7620 PD
Operating Instructions
optiset E entry
A31003-M3030-B629-*-7619 PD
Operating Instructions
optiset E basic 150 E
A31003-M3030-B630-*-7619 PD
Operating Instructions
optiset E standard, optiset E comfort
A31003-M3030-B631-*-7619 PD
Hicom 150 E Office Rel.1.0 Service Manual - 2 System data
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_2.htm (12 of 13) [06/04/2000 13:02:34]