Siemens Hicom 150 E Office - Traffic Restriction Groups

2. Classes of service
3. Allowed/Denied numbers
4. Configure extension class of service
Options
5. Classes of service
6. Station
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Assign outward-restricted trunk access to an extension
2. The extension cannot set up any outgoing external connections (exception: system
speed-dialling)
7.6.12 Traffic Restriction Groups
Definition
A number of traffic restriction groups (TRGs) are provided in the system for all extensions. These
groups define information on toll restriction and route reference (incoming/outgoing) for extensions
and lines.
The following is defined by a TRG matrix:
whether an extension is authorised to seize a trunk line,
whether an extension can seize a trunk line only in the incoming direction or only in the
outgoing direction or
whether an extension can seize a trunk line in the incoming and outgoing directions.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Number of TRGs 6 6 6 6
Dependencies/Limitations
Subject Dependency/Limitation
TRG By default all extensions and lines are located in TRG 1.
Hicom 150 E Office Rel.1.0 Service Manual - 7.6 Features for outgoing external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_76.htm (16 of 21) [06/04/2000 13:10:46]