7.2 Features for general incoming traffic
7.2.1 Distinctive Ringing
Definition
Distinct ring cadences are used to signal different call types. This enables the user to distinguish
between incoming internal and incoming external calls. In ISDN systems, acoustic information is
secondary to displays on the screen, since different features may have the same ring signalling.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Country specifics The ring signals may be country-specific and determined by the approval
authorities.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Define distinctive ringing (for extension and groups)
*9531994
2. 16-19 => Call Management Inc - Ringing Type
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (1 of 48) [06/04/2000 13:09:57]
To Next Page
Loading...
