Siemens Hicom 150 E Office - Display Number of Subscribers with Direct Trunk Access

3. Param
4. Flags
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. An authorised extension activates a feature for another extension by means of a procedure
(e.g. extension 11 activates call forwarding to internal 13 for extension 16).
2. Extension 11 dials: * 83 16 *11 13
7.10.9 Display Number of Subscribers with Direct Trunk Access
Definition
The number of subscribers with direct trunk access in the system can be displayed via system
administration. All extensions in operation with at least outward-restricted trunk access are taken into
account.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Display For Austria only
Configuration options
This feature does not have to be explicitly configured. The feature may only be
queried.
Query via Hicom Assistant T
Query the feature via Hicom Assistant T as follows:
Step Action
1. Perform query
* 9531994
2. 15-5 => Call Barring Menu - Total Active Exts
Hicom 150 E Office Rel.1.0 Service Manual - 7.10 Other features
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (14 of 19) [06/04/2000 13:07:31]