Siemens Hicom 150 E Office - Call Pickup from an Answering Machine

Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Call an extension.
2. Pick up the call using either the programmed key or the code *59 + extension number.
7.2.31 Call Pickup from an Answering Machine
Definition
optiset E users have the option of picking up a call that was already answered by an answering
machine by pressing the appropriate DSS key. This releases the connection to the answering machine.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements Digital subs./port module _
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
General requirements optiset E (standard, comfort, memory)
Dependencies/Limitations
Subject Dependency/Limitation
Answering machine The answering machine port must be configured as such in the system
administration.
Answering machine The answering machine must be programmed under the DSS key on the
optiset E terminal.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure port
*9531994
2. 14-11 => Extension Data Menu - Extension Type
3. Assign `Directed PU' to selected key.
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (43 of 48) [06/04/2000 13:10:00]