Siemens Hicom 150 E Office - Multi-Device Connection; Features for General External Traffic

7.4 Features for general external traffic
7.4.1 Multi-device connection
Definition
OfficePoint and OfficeCom can be operated at an ISDN multi-device connection (S
0
bus). This
permits parallel operation with other ISDN devices at this port. An 11-digit (max.) direct inward
dialling number (MSN of the multi-device connection) can be programmed for each station.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in - x x x
HW requirements - S
0
board -
SW requirements - As of Rel. 1.0 As of Rel. 1.0 -
Dependencies/Limitations
Subject Dependency/Limitation
ISDN terminals ISDN terminals connected in parallel must also receive an MSN on
account of unique call assignment
Directions for PP and PMP If different basic accesses (PP and PMP) are connected to the system,
they must be entered in different directions and the prime line must be
deactivated.
Configuration options
The feature can be configured with:
Hicom Assistant T/Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure S
0
port
*9531994
2. 20-4-1 => ISDN Parameter Menu - EU parameters - S
0
port configuration
1. Configure extension
*9531994
Hicom 150 E Office Rel.1.0 Service Manual - 7.4 Features for general external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_74.htm (1 of 10) [06/04/2000 13:10:14]