Siemens Hicom 150 E Office - Central Attendant Console

Subject Dependency/Limitation
Conference A conference can only be set up between voice terminals.
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Set up a call.
1. Initiate an enquiry.
1. Set up a second call via CorNet.
2. Initiate a conference using the input procedure.
3. If additional subscribers are to be included in the conference, put the conference on hold, set
up another call and enable the conference.
7.11.15 Central Attendant Console
Definition
In a central attendant console, the `switching' and `recall' functions are supported within the network.
A local intercept position can forward intercepted calls via a networked extension (with call
forwarding).
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x _ _
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 _ _
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Hicom 150 E Office Rel.1.0 Service Manual - 7.11 Networking
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_711.htm (15 of 17) [06/04/2000 13:11:34]