7.11.13 Shuttle
Definition
In networked extensions the same conditions apply as described under `Shuttle`.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x _ _
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 _ _
Dependencies/Limitations
Subject Dependency/Limitation
Hold An extension that has been put on hold cannot shuttle.
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Set up a call.
2. Initiate an enquiry.
3. Set up a second call via CorNet.
4. Switch between the two call parties using the shuttle feature.
7.11.14 Conference
Definition
The same conditions apply for this feature in networked PABXs as described under `Conference'.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x _ _
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 _ _
Dependencies/Limitations
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_711.htm (14 of 17) [06/04/2000 13:11:34]
To Next Page
Loading...
