Siemens Hicom 150 E Office - Entering the Route Telephone Number

Singapore 74857265
South Africa 58049590
Spain 96149549
Sweden 53891305
Switzerland 63172653
Thailand 50692539
Turkey 53951509
USA 78110370
IM 85315585
IM2 98256348
5.2.4 Entering the route telephone number
Introduction
In accordance with the configuration, you should enter one of the following on the system telephone
with the extension 100 in the case of OfficeCom and 11 in the case of OfficePoint
the route telephone number (without DID number and attendant code) or
the tie trunk number, e.g. for Hicom 300.
The route telephone number is defined by the carrier or the responsible service provider.
Route telephone numbers cannot be entered with point-to-multipoint operation or tie trunks, e.g. for
Hicom 300 (depending on the configuration).
Example
Port number: 98008
National number: 2302 (prefix without 0)
International number: 49 (country code)
Number type: international
Input procedure
Table 5-13 Entering the route telephone number
Step Entry Explanation
1. *95 System administration code
2. Watch the display.
Scroll until "All data?" appears.
Confirm your selection.
3. 31994 Password for access to system administration.
Hicom 150 E Office Rel.1.0 Service Manual -
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_5fc.htm (4 of 9) [06/04/2000 13:07:42]