Siemens Hicom 150 E Office - Configuring DISA

8.33 Configuring DISA
Introduction
With DISA (Direct Inward System Access), features such as direct services for the internal extension
or associated services can be used via an external connection in Hicom 150 E Office.
Example 1
DISA is configured via a digital line for extension 11.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 14-15 Release DISA for extension EXT 11: Denied
3.
* 1
Release DISA for extension 11 EXT 11: Allowed
4. F8 Return to main menu System Administration
5. 34-2 Enter MSN no. for DISA Call No.: -
6.
* 79
Enter MSN no. for DISA,
e.g. 79
Call No.: 79
7. F7 Return to DISA Line 1: 0
8. 3 Enter security mode Mode: After timeout
9.
* 1
Change security mode to # Mode: After #
10. F8-F7 Exit system administration Set time, Set date
Example 2
DISA is configured for extension 11 via an LS trunk.
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 14-15 Release DISA for extension EXT 11: Denied
3.
* 1
Release DISA for extension 11 EXT 11: Allowed
4. F8 Return to the main menu System Administration
5. 34-2 Enter MSN no. for DISA Call No.: -
Hicom 150 E Office Rel.1.0 Service Manual - 8.33 Configuring DISA
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_833.htm (1 of 2) [06/04/2000 13:14:28]