Siemens Hicom 150 E Office - Configuring a Fax Machine

8.7 Configuring a fax machine
Example
Analog fax machine with extension "124".
Incoming fax message display programmed on key on terminal "102" (optiset E Standard).
Programming with Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2. 14-11 Set up the extension type Ext 100: Auto-start
3.
# 124
Select extension 124 Ext 124: Auto-start
4.
* 1
Select "Fax" as the extension type Ext 124: Fax
5. F8 F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Options -> Set up station -> Station -> Param -> Type
Example
Program an info key on terminal 102
Step Entry Action Display
1. *91 Program key Press feature key
2. Select the required key Key not programmed
Change feature?
3. Confirm key change Select feature:
Program Rep. key:
4. Press "Next" until "Fax details" appears Select feature:
Fax details?
5. Confirm selection Mess from:
6.
124
Enter the fax number Saved
End?
Hicom 150 E Office Rel.1.0 Service Manual - 8.7 Configuring a fax machine
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_87.htm (1 of 2) [06/04/2000 13:12:30]