1 Not used 3 a wire 5 + pole
2 - pole 4 b wire 6 Not used
Connection example for the plug-type AC adapter
Figure 9-7 Connection example for the plug-type AC adapter
9.2.2.13 Headsets
The headsets listed in the following table can be connected to the optiset E control adapter, headset
adapter and headset plus adapter.
Table 9-5 Headsets for the optiset E
adapter
Headset Order number
Encore L30460-X1282-X1
Encore binaural L30460-X1282-X2
Tristar L30460-X1282-X3
Supra L30460-X1282-X4
Profile L30460-X1283-X1
Profile binaural L30460-X1283-X2
9.2.2.14 Configuration restrictions
The possible configurations for the Hicom 150 E Office system can be found in Table 9-7. Any
configurations not listed should not be used under any circumstances.
You can run the supply voltage test to check whether the use of a plug-type AC adapter is
necessary for one of the configurations listed below. In case of doubt, you should always run
the test when installing large configurations.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_9.htm (13 of 17) [06/04/2000 13:06:13]
To Next Page
Loading...
