Siemens Hicom 150 E Office - Connected Line Identification Presentation (COLP); Connected Line Identification Restriction (COLR)

7.13.5 Connected Line Identification Presentation (COLP)
Definition
This feature allows the calling extension to determine whether the connection has actually been
switched to the relevant terminal or whether the call has been accepted by another terminal.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements optiset E with display
HW requirements S
0
module -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
CO feature x x x x
Extension feature x x x x
Dependencies/Limitations
Subject Dependency/Limitation
7.13.6 Connected Line Identification Restriction (COLR)
Definition
This feature suppresses the display of the called extension`s number on the calling extension. The
called subscriber can use COLR to prevent his number from being displayed on the calling extension.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements S
0
module -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
CO feature x x x x
Extension feature x x x x
Dependencies/Limitations
Subject Dependency/Limitation
COLR Same CDBase entry as CLIR
Hicom 150 E Office Rel.1.0 Service Manual - 7.13 Euro-ISDN features
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_713.htm (5 of 16) [06/04/2000 13:11:53]