Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Query missed calls list:
via the service menu or using a code (#82)
2. Store the extension numbers under dialog keys
3. Class of service:
*9531994
4. 14-21=> Extension Data Menu - Missed Calls List
5. Missed calls list mode:
*9531994
6. 22-15=> System Options - Missed Calls List Mode
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Class of service:
Options
2. Set up station
3. Station
4. Parameter=> Flags
5. Missed calls list mode:
Options
6. System Parameters
7. Flags / CMI
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Call an extension and hang up the phone.
2. If a "missed calls list" key is programmed, its LED should light up. Otherwise, retrieve the
entries from the missed calls list menu or by entering a code (#82).
7.2.28 Call Pickup (PU)
Definition
The "call pickup for extensions" feature enables you to answer calls that were originally destined for
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (38 of 48) [06/04/2000 13:09:59]
To Next Page
Loading...
