Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Call an extension.
2. Pick up the call from another extension.
7.2.29 Call Pickup (PU) Within Call Pickup Groups
Definition
Calls that are signalled acoustically at an extension in a call pickup (PU) group are signalled
simultaneously on the displays of the other group members and indicated by a LED (next to the
programmed key). The call can be picked up by pressing the key or dialling a code. Acoustic PU
signalling (after 3 rings) can also be configured system-wide.
The following variants of the call pickup feature also exist:
Call Pickup (PU) (on page 7-85)
Directed Call Pickup Outside a PU Group (on page 7-89)
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements _ _ _ _
Groups/extensions 32 / 32 32 / 32 8 / 8 8 / 8
Dependencies/Limitations
Subject Dependency/Limitation
PU Only voice terminals can be entered. An extension can belong to only one group.
Recall
Callback
Recall and callback calls are not signalled at the extensions of the other group
members.
Do not disturb Stations that have activated do not disturb do not receive PU signalling.
Transfer Unscreened transfer calls cannot be picked up within the group.
Groups All group members are authorised to pick up calls.
Camp-on A camped-on call can be picked up. If more than one call is waiting, the first
subscriber to place a call is always picked up.
Configuration options
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (40 of 48) [06/04/2000 13:09:59]
To Next Page
Loading...
