Siemens Hicom 150 E Office - Call Detail Recording Using a P500 Printer

8 Configuration guidelines
Chapter contents
This chapter discusses the following topics.
Topic
Section 8.1, "Call detail recording using a P500 printer" page 8-3
Section 8.2, "Call detail recording using a call charge computer (GCM, Teledata)" page 8-4
Section 8.3, "Displaying an incoming call as a company name" page 8-5
Section 8.4, "Busy signal for call waiting parties on the AC when S0 channels are still
available"
page 8-8
Section 8.5, "Configuring voice mail" page 8-9
Section 8.6, "Configuring toll restriction per extension" page 8-11
Section 8.7, "Configuring a fax machine" page 8-13
Section 8.8, "Configuring an ISDN system interface" page 8-14
Section 8.9, "Configuring an ISDN multi-device connection with MSN no. assignment" page 8-15
Section 8.10, "Configuring Call Management with group call and call forwarding - no
answer"
page 8-16
Section 8.11, "Announcement before answering (on analog port)" page 8-18
Section 8.12, "Assigning incoming MSI calls" page 8-20
Section 8.13, "Configuring fixed night service" page 8-21
Section 8.14, "Configuring an intercept extension per line" page 8-23
Section 8.15, "CorNet networking" page 8-25
Section 8.16, "Configuring the boss/secretary function" page 8-42
Section 8.17, "Boss/secretary systems (TOP)" page 8-43
Section 8.18, "Configuring an internal S0 bus with multiple extensions" page 8-49
Section 8.19, "Configuring call pickup groups" page 8-50
Section 8.20, "Configuring a second V24 interface" page 8-51
Section 8.21, "Configuring an entrance telephone and entrance telephone ring
destination"
page 8-52
Section 8.22, "Configuring a door busy actuator" page 8-53
Section 8.23, "Programming a sensor as an alarm dialling device" page 8-54
Hicom 150 E Office Rel.1.0 Service Manual - 8 Configuration guidelines
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_8.htm (1 of 2) [06/04/2000 13:08:25]