Siemens Hicom 150 E Office - Call Detail Recording Per Trunk (CDRT)

Check the feature for error-free functioning as follows:
Step Action
1. Conduct a call on the "pay phone".
2. At the end of the call, the LED for the "call charge display" lights up on the assigned
terminal.
7.12.6 Call Detail Recording Per Trunk (CDRT)
Definition
The system has a summation memory for call charge amounts accrued per trunk line. A memory is
permanently assigned to each line.
A system telephone can query and delete the summation memory. Call charge deletion requires
confirmation. The current CDRT data can be printed out via system administration. The printout
contains a list of CDRT data for all lines connected to the system. The current CDRT data can be
printed out on a printer connected to one of the V.24 interfaces.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements With loop start:
GEE8
optiset E
terminal with
display
With loop start:
GEE12/16/50
optiset E
terminal with
display
With loop start:
GEE12/16/50
optiset E
terminal with
display
optiset E
terminal with
display
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
General
requirements
Call charge information from public network
Dependencies/Limitations
Subject Dependency/Limitation
Configuration options
This feature does not have to be explicitly configured.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Conduct a chargeable call.
Hicom 150 E Office Rel.1.0 Service Manual - 7.12 Features for Call Detail Recording
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_712.htm (8 of 21) [06/04/2000 13:08:18]