The feature is executed via Hicom Assistant E as follows:
Step Action
1. Reset activated feature
System status
2. System-wide
3. Flags
4. Select the extension whose features should be cancelled.
Perform feature check via Hicom Assistant T
Check the feature for error-free functioning as follows:
Step Action
1. Activate call forwarding on a terminal.
2. Dial the code (#0) for "reset activated features".
3. Call forwarding is reset.
7.10.12 Relocation function
Definition
This feature allows terminals to be plugged in at a new location without having to change the system
configuration afterwards. When a terminal is moved, the extension number and extension features
(e.g. activated call forwarding, key assignments, etc.) remain unchanged.
This ensures that all extensions involved in the move are again available as quickly as possible.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (17 of 19) [06/04/2000 13:07:31]
To Next Page
Loading...
