Siemens Hicom 150 E Office - Call Override;Intrusion

7.1.13 Call Override/Intrusion
Definition
Authorised users and the current intercept position (day or night) can use a code or key to override a
call in progress at an internal extension.
The participating extensions are notified of the call override/intrusion by an alerting tone and a screen
display.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements - - - -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Voice channel signalling
security
You cannot override a call if the called extension or its internal call
partner is entered as a data extension (voice channel signalling security),
or if the called party is dialling a number.
Group call/hunt group You cannot override if all extensions are busy when placing a call to a
group or a hunt group.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure call override/intrusion:
*9531994
2. 14-13 => Extension Data Menu - Intrusion Ability
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure call override/intrusion:
Options
2. Set up station
Hicom 150 E Office Rel.1.0 Service Manual - 7.1 Features for all traffic types
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_71.htm (15 of 18) [06/04/2000 13:09:16]