Siemens Hicom 150 E Office - Calling Line Identification Restriction (CLIR)

network.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements optiset E with display
HW requirements S
0
module -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
CO feature x x x x
Extension feature x x x x
Dependencies/Limitations
Subject Dependency/Limitation
7.13.4 Calling Line Identification Restriction (CLIR)
Definition
This feature suppresses the display of the calling extension`s number of the called extension.
Suppression (temporary or permanent) must be supported in the public exchange.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements S
0
module -
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
CO feature x x x x
Extension feature x x x x
Dependencies/Limitations
Subject Dependency/Limitation
CLIR Suppression of number display can be defined on a system-wide basis.
CLIR Using Hicom Assistant E a CLIR setting that has been activated on a system-wide basis
can be ignored and the station number of the calling party can thus be displayed. This may
be useful for emergency calls for example.
Hicom 150 E Office Rel.1.0 Service Manual - 7.13 Euro-ISDN features
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_713.htm (3 of 16) [06/04/2000 13:11:53]