Siemens Hicom 150 E Office - Mozart CD Announcement Device with Start;Stop Contact at the TIEL Board

8.39 Mozart CD announcement device with
start/stop contact at the TIEL board
Example
Connecting the Mozart CD (approval number A107674D) as an announcement device with start/stop
contact to TIEL.
Example of single-cabinet system configuration:
Slot 2 = SLMO24
Slot 3 = SLA 16
Slot 4 = TML8W
Slot 5 = TIEL
Slot 6 = STMD8
The customer has two PP trunk connections with different call numbers:
PP interface 1 with call number 12345 on STMD8 port 1
PP interface 2 with call number 67890 on STMD8 port 2.
The call number 12345 is a hotline number. The announcement device should send an
announcement every time to the calling extension.
Prerequisite: system status after reload. The route call numbers are entered under the ISDN
parameters.
Programming via Hicom Assistant T
Step Entry Action Display
1. *95 31994 Start system administration System Administration
2.
25-1 * 0501
Assign the announcement device:
slot 5 / port 1 TIEL
Ann. device 1: 0501
3.
F7 3 * 1
STMD port 1:
assign the announcement to trunk 1
Sl/Le 0601: 1
4.
*1
STMD port 1:
assign the announcement to trunk 2
Sl/Le 0602: 2
5. F8-F7 Exit system administration Set time, Set date
Note
The position of the Dip-Fix switch settings on the TIEL board is described in Section 3.3.8.
Connection of Mozart CD
Hicom 150 E Office Rel.1.0 Service Manual - 8.39 Mozart CD announcement device with start/stop contact at the TIEL board
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_839.htm (1 of 2) [06/04/2000 13:14:42]