Siemens Hicom 150 E Office - Entering the Route Telephone Number

Austria 48376691 Netherlands 2 99291187
Belgium 25279542 Norway 53911312
Brazil 14463075 Philippines 99251479
Brazil 2 99327765 Poland 51978559
China 98245912 Portugal 37496521
Czech Republic 98385917 Russian Federation 79682713
Denmark 98457559 Singapore 74857265
Finland 69442143 South Africa 58049590
France 68141859 Spain 96149549
France 2 52633110 Sweden 53891305
Germany 45109382 Switzerland 63172653
Great Britain 54721445 Thailand 50692539
Greece 52632505 Turkey 53951509
Hungary 75572398 USA 78110370
India 98274353
Indonesia 78112637
Ireland 98213498 IM 85315585
Italy 70129594 IM2 98256348
5.1.5 Entering the route telephone number
Introduction
In accordance with the configuration, you should enter one of the following on the system telephone
with internal extension number 100:
the route telephone number (without DID number and attendant code), or
the tie trunk number, e.g. for Hicom 300.
The route telephone number is defined by the network provider or the responsible service provider.
Route telephone numbers must not be entered for point-to-multipoint operation or tie trunks, e.g. for
Hicom 300 (depending on the configuration).
Example
Port number: 98008
National number: 2302 (prefix without 0)
International number: 49 (country code)
Number type: international
Input procedure
Table 5-7 Entering the route telephone number
Hicom 150 E Office Rel.1.0 Service Manual - 5 Start-up
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_5m.htm (6 of 7) [06/04/2000 13:06:35]