Siemens Hicom 150 E Office - A System Programming Codes; Codes for Controlling Services

A System programming codes
A.1 Passwords
Activating system administration with an access code.
Code Meaning Explanation
* 95 Start system administration Start system administration
31994 System administration
"All data"
Start the system administration
main menu
45109382
(e.g. BRD)
Country initialisation,
for list, see
Table 5-6 (OfficePro)
Table 5-12
(OfficeCom/OfficePoint/OfficeOne)
Concealed initialisation of the
country-dependent parameters.
Once the country-dependent
parameters have been initialised,
all other displays appear in the
country-specific language.
The BRD-specific parameters are
set by default
73855392 Reset connected options
(OfficeCom/OfficePoint only)
Start the system administration
main menu
62659321 Reset board and port assignment stored in the system
A.2 Codes for controlling services
The following table lists the features that can be activated (*) or deactivated (#) with codes.
Table A-1 Codes for controlling services
Feature Activate Deactivate Terminal
Absence texts/advisory messages * 69 # 69 D
Accept camp-on * 55 A
Activate remote DTMF administration
(master system)
* 991 D
Answer group * 81+call no. # 81 A
Assign station numbers (MUSAP) * 41+DID no. A
Associated dial for a U
P0/E
ext. *67+ext+call no. A
Associated services *83+ext+
service
A
Hicom 150 E Office Rel.1.0 Service Manual - A System programming codes
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_a1.htm (1 of 18) [06/04/2000 13:07:13]