Second telephone: A second telephone is implemented via call management. The central ringer
type or the additional terminal to be called (second telephone) is entered in the call destination
lists.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements U
P0/E
terminal with display
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Boss/secretary groups 1-16 1-10 1-4 1-4
Dependencies/Limitations
Subject Dependency/Limitation
Camp-on Only the secretary telephone can camp on an executive telephone. Call
waiting is performed immediately with a special camp-on tone.
Direct station selection A DSS key is available only with the boss/secretary feature.
Camp-on rejection If a boss is entered without a secretary, the boss extension has the camp-on
rejection feature.
Do not disturb When do not disturb is activated, the DSS key LED is illuminated
continuously. A call is automatically signalled on the partner`s telephone. If
the boss telephone has authorisation for `override', a call from the boss to
the secretary is connected through immediately.
Boss/secretary If two bosses are to be assigned to one secretary telephone, the 2 bosses and
the secretary telephone must be entered in one boss/secretary group.
Otherwise, only the transfer after voice calling feature works.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure boss/secretary function
* 9531994
2. 18-1 => Boss/Secretary - configure Boss/Secretary Grp
3. Configure DSS key
*91 => Entry to key programming.
4. Press relevant key.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (8 of 19) [06/04/2000 13:07:30]
To Next Page
Loading...
