Extension-specific modification of language setting
It is also only possible to modify the language in the case of the first two stations with display
found. To change the language, the extension is specified in the service menu and the relevant
language is selected.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements U
P0/E
terminal with display
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
System administration The languages Serbo-Croat, Slovenian, Czech and Turkish are not available
for system administration.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Set language for the terminals
* 9531994
2. 14-26 => Extension Data Menu - Specify language
3. Define extension
4. Option:
a) confirm to change the defined extension only.
b) change all extensions of the same type.
c) change all extensions.
5. Confirm selected language.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Set language for the terminals
Options
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (10 of 19) [06/04/2000 13:07:31]
To Next Page
Loading...
