2. Ext. 103 activates relocate with *9419. The service LED lights up. The message "Relocate" is
displayed on terminals with display.
3. Ext. 104 concludes the relocate procedure with *9419. The ports have now been physically
exchanged.
4. Situation after relocate:
Ext. 103 and slave 503 are now assigned to slot 2 / port 5.
Ext. 104 and slave 504 are now assigned to slot 2 / port 4.
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_710.htm (19 of 19) [06/04/2000 13:07:31]
To Next Page
Loading...
