Camp-on Busy extensions receive camp-on or ring injection if no other extensions are
available.
Group call on/off Each member of a group call can leave the call with #85 and join the call again
with *85.
Hunt group If a subscriber is entered in a group call and in a hunt group, both features
should be modified such as *85/#85 for example.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure group call
* 9531994
2. 16-15-1 => Call Management Inc - Group Setup - Group Members
3. 16-15-2 => Call Management Inc - Group Setup - Group Type
4. 16-15-3 => Call Management Inc - Group Setup - Group Name
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure group call
Options
2. Incoming Calls
3. Hunt group
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Set up a group.
2. Call the group`s extension number.
3. The extensions in the group should ring.
Hicom 150 E Office Rel.1.0 Service Manual - 7.2 Features for general incoming traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_72.htm (14 of 48) [06/04/2000 13:09:58]
To Next Page
Loading...
