Siemens Hicom 150 E Office - Page 489

Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure speed-dialling
*9531994
2. 12-1 => Speed Dial - Abb. Dial No.
3. Enter speed-dialling destination.
4. Enter destination number with route code.
5. Configure name for speed-dialling
*9531994
6. 12-2 => Speed Dial - Abb. Dial Name
7. Enter speed-dialling destinations
8. Enter name from the optiset E memory keypad.
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure speed-dialling
Options
2. System Parameters
3. Speed dialing system
4. Enter the trunk group code, call numbers and names under the relevant speed dialling system
destinations.
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Configure speed-dialling destination.
2. Access the speed-dialling destination by entering the code (*7 + destination number) or
pressing a key and entering the destination number.
3. The external connection is set up.
Hicom 150 E Office Rel.1.0 Service Manual - 7.6 Features for outgoing external traffic
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_76.htm (4 of 21) [06/04/2000 13:10:45]