member of a group.
Model-Specific Data
Subject OfficePro OfficeCom OfficePoint OfficeOne
Feature available in x x x x
HW requirements a/b ports a/b ports a/b ports a/b ports
SW requirements As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0 As of Rel. 1.0
Dependencies/Limitations
Subject Dependency/Limitation
Single-call radio paging
equipment
The extended call processing properties available with enhanced
radio paging equipment are not possible.
Configuration options
The feature can be configured using:
Hicom Assistant T / Hicom Assistant E
Programming Feature Via Hicom Assistant T
Configure the feature via Hicom Assistant T as follows:
Step Action
1. Configure radio paging equipment
*9531994
2. 32-1 => Page - Radio paging port
3. 32-2 => Page - Radio paging type
Programming Feature Via Hicom Assistant E
Configure the feature via Hicom Assistant E as follows:
Step Action
1. Configure radio paging equipment
Options
2. Trunk modules
3. Ext. connection
Performing Feature Check
Check the feature for error-free functioning as follows:
Step Action
1. Configure radio paging equipment.
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_78.htm (9 of 17) [06/04/2000 13:11:10]
To Next Page
Loading...
