Siemens Hicom 150 E Office - Page 581

24. Confirm selection of extension 200 List 1, Mbr 2: 200
25. F7 Return to: CM-Elements CM-Elements
26. 3 Initiate selection of "Extern. call, Day" Call No. 200: 30
27. # Initiate selection of "Select Call No." Call No.
28. 250 Select station 250 Call No. 250
29. Confirm station 250 Call No. 250: 30
30. * Select "Change entry" Call No. 250:
31. 1 Select CM-Target 1 Call No. 250: 1
32. Confirm CM-Target 1 Call No. 250: 1
33. F8 F7 Exit system administration Set time and Set date
Programming with Hicom Assistant E
Step Action
1. Configure the extension type:
Options -> Set up station -> Station -> Param -> Type
2. Enter the name:
Options -> Set up station -> Station
3. Enter the call destination:
Options -> Incoming calls -> Call destination lists
Options -> Incoming calls -> Assignment int./ext. calls
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.3 Displaying an incoming call as a company name
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_83.htm (3 of 3) [06/04/2000 13:12:18]