Siemens Hicom 150 E Office - Page 641

11.
* 1
Change the parameter to "yes" Grp 1, to Grp 2: yes
12.
+ * 1
Scroll to "Allowed traffic restriction" TRG group 1
with TRG group 3
Grp 1, to Grp 3: no
13.
* 1
Change the parameter to "yes" Grp 1, to Grp 3: yes
14.
F1 2
Select TRG group 2
- Define Allowed traffic restriction for TRG group
2 with TRG group 1
Grp 2, to Grp 1: no
15.
* 1
Change the parameter to "yes" Grp 2, to Grp 1: yes
16.
+
Scroll to "Allowed traffic restriction" TRG group 2
with TRG group 2
Grp 2, to Grp 2: no
17.
* 1
Change parameter to "yes" Grp 2, to Grp 2: yes
18.
+
Scroll to "Allowed traffic restriction" TRG group 2
with TRG group 3
Grp 2, to Grp 3: no
19.
F1 3 * 1
Select TRG group 3
Define Allowed traffic restriction TRG group 3
with TRG group 1, maintain the default parameter
Grp 3, to Grp 1: no
20.
* 1
Change parameter to "yes" Grp 3, to Grp 1: yes
21.
+
Scroll to "Allowed traffic restriction" TRG group 3
with TRG group 2
Grp 3, to Grp 2: no
22.
* 1
Change parameter to "yes" Grp 3, to Grp 2: yes
23.
+
Scroll to "Allowed traffic restriction" TRG group 3
with TRG group 3
Grp 3, to Grp 3: no
24.
* 1
Change parameter to "yes" Grp 3, to Grp 3: yes
25. F8-F7 Exit system administration Set time, Set date
Programming with Hicom Assistant E
Step Action
1. Options -> Classes of service -> Group assignment
2. Options -> Classes of service -> CON matrix
| Siemens | Home | First Page | Previous Page | Next Page | Search | Info | Help |
© Siemens AG, München, 1998
Hicom 150 E Office Rel.1.0 Service Manual, 2, 1998-06-26
Siemens Part No.: P31003-M1530-X403-2-7620
Conversion Date: 1998-09-18
Hicom 150 E Office Rel.1.0 Service Manual - 8.28 Configuring TRG groups
http://cmweb01.mch.pn.siemens.de/e_doku/en/h150/h15/30/sh/2/15_828.htm (2 of 2) [06/04/2000 13:13:47]