BCM5722 Programmer’s Guide
10/15/07
Broadcom Corporation
Page 469 Transceiver Registers Document 5722-PG101-R
Comma Detected
Bit 7 of 1000BASE-X Auto-negotiation Debug register indicates a comma was detected since last read.
AN_Sync_Status
Bit 6 of 1000BASE-X Auto-negotiation Debug register indicates the AN_sync_status has not failed since last read.
Idle Detect State
Bit 5 of 1000BASE-X Auto-negotiation Debug register indicates the idle detect state entered since last read.
Complete Acknowledge State
Bit 4 of 1000BASE-X Auto-negotiation Debug register indicates the complete acknowledge state entered since last read.
Acknowledge Detect State
Bit 3 of 1000BASE-X Auto-negotiation Debug register indicates the acknowledge detect state entered since last read.
Ability Detect State
Bit 2 of 1000BASE-X Auto-negotiation Debug register indicates the ability detect state entered since last read.
Error State
Bit 1 of 1000BASE-X Auto-negotiation Debug register indicates the error state entered since last read.
AN_Enable State
Bit 0 of 1000BASE-X Auto-negotiation Debug register indicates the AN_enable state entered since last read.