CHAPTER 14: External Bus Interface
764 FM4 Peripheral Manual, Doc. No. 002-04856 Rev. *E
Bus Access Modes and Functions Setups
Bus access modes and the functions setups are shown in Table 3-2.
Table 3-2 Bus Access Modes and Functions Setups (Products other than TYPE0)
Do not make a setup which uses page read and NAND Flash mode at the same time.
Do not make a setup which uses page read and external RDY at the same time.
Do not make a setup which uses NAND Flash mode and external RDY at the same time.
Do not output the clock in NAND Flash mode.
Note:
− Number and functions of external bus interface pins used depend on the product used. See the
data sheets of products used for the details.
To Next Page
Loading...
