Tables
2-1. Library I/O Station configurations 2-3
2-2. Optional features .........2-10
2-3. Licensable cartridge slots (storage and I/O)
per model ............2-20
2-4. Nominal Cartridge Life: Load/Unload
Cycles .............2-28
2-5. Environment for operating, storing, and
shipping the LTO Ultrium Tape Cartridge . 2-28
2-6. Physical specifications for the library 2-31
2-7. Library component weight ......2-31
2-8. Power specifications for a 5U Control
Module and 9U Expansion Module . . . 2-31
2-9. Other specifications for the library 2-32
2-10. Environmental specifications for the library 2-32
3-1. Cable Spool Assembly components 3-9
4-1. Tape Library Operator Panel Menu Tree 4-7
4-2. Menus available from the Web User
Interface.............4-8
4-3. System Functions, Commands, and Access 4-10
7-1. Methods of Capturing Drive Logs 7-10
7-2. LCB LEDs............7-18
7-3. Amber LED on an LCB .......7-19
7-4. Tape Drive Activity ........7-20
7-5. Fibre Port Link LED on Tape Drive 7-21
7-6. Power Supply LEDs ........7-22
7-7. Robot Assembly connectors ......7-36
7-8. M2 Robot Assembly connectors 7-38
8-1. Library FRUs and CRUs .......8-1
8-2. Servicing library components: Library state
required .............8-2
9-1. Service activity ..........9-1
10-1. Power Cords ...........10-4
A-1. TapeAlert Flags Supported by the Ultrium
Tape Drive............A-1
B-1. Library Sense Keys, ASC and ASCQ B-1
B-2. LTO Tape Drive Sense Data ......B-6
C-1. Control module (CM) power requirements C-1
C-2. Typical expansion module (EU) power
requirements ...........C-2
D-1. Meaning of Status Light and
Single-character Display (SCD) .....D-2
D-2. Functions that the Unload Button performs D-4
D-3. Ultrium cartridge compatibility with
Ultrium tape drives.........D-9
D-4. Bar code label requirements for Ultrium
tape drives and libraries .......D-10
D-5. Cartridges and VOLSERs ......D-10
D-6. Manual Cartridge Assignment Status D-13
D-7. Environment for operating, storing, and
shipping the LTO Ultrium Tape Cartridge . D-17
D-8. Media supplies ..........D-18
D-9. Authorized suppliers of custom bar code
labels .............D-19
D-10. Diagnostic and maintenance functions D-26
D-11. Error codes on the Single-character
Display ............D-41
D-12. Troubleshooting Tips for the Ultrium Tape
Drive .............D-48
D-13. Methods of Receiving Errors and
Messages for the Ultrium Tape Drive . . D-49
D-14. Host Method of Recording Tape Drive
Errors.............D-50
D-15. SCSI Bus Problems ........D-51
D-16. Choosing the port for your topology and
Fibre Channel connection ......D-55
E-1. AIX ERRPT Library Sense Data .....E-2
E-2. AIX ERRPT Drive Sense Data .....E-3
F-1. Status MIB variables ........F-1
F-2. Status Traps ...........F-1
© Copyright IBM Corp. 2005, 2010 xvii
||
||
To Next Page
Loading...
Need help?
General
