To manage the library using the Web UI, you must set up the initial network
configuration of the library from the Operator Panel touchscreen. For more
information, see in the Setup and Operator Guidethe Setup and Operator Guide.
Logging in to the Web User Interface
Initial login information is as follows:
v User: admin
v Password: secure
For more information on user privileges, see “User Privileges” on page 4-10.
Note: The login screen gives the user a choice between using local authentication
(the login and password are stored on the library) or LDAP authentication
(the login and password are stored on a server, and the user must specify
the LDAP domain name).
The Local and LDAP authentication choices are always displayed on the
login screen, independent of the library Authentication Settings.
Common Header Elements
All Operator Panel screens (except for the Login screen) contain the following
common elements in the header:
v Help - context-sensitive help for the associated page
v Logout - ability to log out
Menus Available from the Web User Interface
The following table lists those menus that are available from the Web UI.
Table 4-2. Menus available from the Web User Interface
Welcome Page
– Monitor System
System Summary
Library Map
Logged in Users
Network Settings
Key Path Diagnostic Status
─Advanced Reporting
-- Drive Utilization
-- Media Integrity
Media Security
─ Manage Cartridges
Data Cartridges
Cleaning Cartridges
I/O Station
Lock/Unlock I/O Station Doors
─ Manage Drives
Drive Summary
4-8 TS3310 Tape Library Maintenance Information
|
|
|
To Next Page
Loading...
Need help?
General
