IBM TS3310 User Manual

Menus Available from the Operator Panel
The following three menus organize commands into logical groups:
Note: The menus available to users with theAdmin role are Setup, Operations, and
Tools. The menus available to users with theUser role are Operations and
Tools. The menus available to the Service login are Setup, Operations, Tools,
and Service.
v The Setup menu consists of commands that you can use to set up and configure
various aspects of the library, including logical libraries, user management, drive
settings, licenses, date and time, network management, and control path.
v The Operations menu consists of commands that enable you to change the
library's mode of operations, insert and remove cartridges, load and unload
drives, move media, and shutdown/restart the library.
Figure 4-5. Setup menu screen
Chapter 4. User Interfaces 4-5

IBM TS3310 Specifications

General

Form Factor	Rack-mountable
Tape Technology	LTO Ultrium
Product Type	Tape Library
Interface	Fibre Channel
Expansion	Expandable with additional modules
Supported Tape Technology	LTO Ultrium 5, LTO Ultrium 6
Weight	120 lb (54.4 kg) (fully configured)
Power Supply	Dual redundant power supplies
Operating Temperature	41°F to 95°F (5°C to 35°C)
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)
Humidity	20% to 80% non-condensing