Appendix F. SNMP Status MIB Variables and Traps
The two tables in this appendix provide a quick reference for the status MIB
variables and status traps.
Table F-1. Status MIB variables
Event Object ID* Description
Drive Online/Offline
Status
...11.3.1.10 Indicates whether the drive is online or offline. If the drive is
offline, use the Operator Panel or Web User Interface to
confirm that the drive is varied ON. Also check library power.
Physical Library
Online/Offline Status
...14.1 Indicates whether the library is online or offline. Use the
Operator Panel or Web User Interface to confirm that the
library is online and not being configured.
Robotic Readiness ...14.30.2 Indicates the library robotics ready status. Verify that the
module door(s) are closed and that the robotics are online.
Library Main Door ...14.2 Indicates the library main door status.
I/O Station Door Status ...14.3 Indicates the library I/O station door status.
Logical Library
Online/Offline Status
...13.2.1.8 Indicates whether a specific logical library is online or offline.
You can use the Operator Panel or Web UI to confirm the
logical library is online and not being configured.
* Because the front portion of the MIB variable object ID (OID), 1.3.6.1.4.1.3764.1.10.10, is the same for all variables
defined in the MIBs, it is omitted in the OID column of this table. For example, the actual OID of the Drive
Online/Offline Status variable is 1.3.6.1.4.1.3764.1.10.10.11.3.1.10.
Table F-2. Status Traps
Event Trap ID Description
Starting 1 Indicates that the tape library has started running.
Shutting down 2 Indicates that the library is in the process of being shut down.
Restarting 3 Indicates that the library has been restarted. This does not
imply anything about whether the configuration has changed
or not (unlike the standard coldStart or warmStart traps).
Startup Sequence
Completed
101 Indicates that the library startup sequence has completed.
Shutdown Sequence
Completed
102 Indicates that the library shutdown sequence has completed.
Change in Online State 103 Indicates that the online state of the physical library has
changed.
Physical Library Door
Status Change
104 Indicates whether the physical library door has been opened,
closed, locked, or unlocked.
I/O Door Status Change 105 Indicates that an I/O station door has been opened, closed,
locked, or unlocked.
Robotics Ready 106 Indicates the library robotics system has transitioned from "not
ready" to "ready". Traps 106 and 107 may occur as part of a
startup or shutdown procedure. If they occur at another time,
a library door may be open.
© Copyright IBM Corp. 2005, 2010 F-1
|
|
|||
|||
|||
|||
|
|
|
|
||
|
|
||
|||
|
|
|
||
|
|||
|
|||
|
|
|
To Next Page
Loading...
Need help?
General
