IBM TS3310 User Manual

Methods of Updating Firmware
Important: When updating firmware:
v Ensure all host applications are varied offline.
v Do not power-off the library until the update is complete, or the
firmware may be lost.
Periodically check for updated levels of firmware by visiting the web at
http://www.ibm.com/storage/lto. Update firmware using:
Type of Firmware Operator Panel Web User Interface SCSI/Fibre Interface
Library Not Available Service
Library->View/
Update Library
Firmware Level (This
operation can take as
long as 30 minutes.)
Figure 7-6. Location of M2 Picker Assembly LED
7-24 TS3310 Tape Library Maintenance Information

IBM TS3310 Specifications

General

Form Factor	Rack-mountable
Tape Technology	LTO Ultrium
Product Type	Tape Library
Interface	Fibre Channel
Expansion	Expandable with additional modules
Supported Tape Technology	LTO Ultrium 5, LTO Ultrium 6
Weight	120 lb (54.4 kg) (fully configured)
Power Supply	Dual redundant power supplies
Operating Temperature	41°F to 95°F (5°C to 35°C)
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)
Humidity	20% to 80% non-condensing