1 0, 1 (PS1 primary power
supply in a control
module)
2
0, 2 (PS2 redundant power supply in a
control module)
Data Cartridges
The different generations of IBM Ultrium data cartridges can be identified by color:
Type Color
Ultrium 5 Burgundy
Ultrium 5 WORM Burgundy and Silver gray
Ultrium 4 Green
Ultrium 4 WORM Green and Silver gray
Ultrium 3 Slate Blue
Ultrium 3 WORM Slate Blue and Silver gray
Ultrium 2 Purple
Ultrium 1 Black
All generations contain 1/2-inch, dual-coat, metal-particle tape.
You can order tape cartridges with the bar code labels included, or you can order
custom labels. To obtain tape cartridges and bar code labels, see “Ordering Media
Supplies” on page D-17.
When processing tape in the cartridges, Ultrium Tape Drives use a linear,
serpentine recording format. The native data capacity and recording format of
Ultrium data cartridges is as follows:
Type Native Data Capacity Recording Format
Ultrium 5 1500 GB (3000 GB at 2:1
compression)
Reads and writes data on 1280
tracks, sixteen tracks at a time
Ultrium 4 800 GB (1600 GB at 2:1
compression)
Reads and writes data on 896
tracks, sixteen tracks at a time.
a66ug046
1
2
Figure 2-11. Power supply location coordinates
2-26 TS3310 Tape Library Maintenance Information
|
||
||
||
||
||
||
||
||
||
|
|
To Next Page
Loading...
Need help?
General
