IBM TS3310 User Manual

– Save device error dump
– Download device code
The tape service program is invoked by using the /opt/stddutil/tapesrvc
command.
Note: You must have root authority to run the tape service program.
The program is menu driven. Use discretion when running this program because
it opens the device in diagnostic mode.
v Sample program
A sample program called tapetest.c is provided, which gives a demonstration of
the device driver interface usage.
The sample program is invoked by using the /opt/stddutil/tapetest command.
The program is useful for verifying that the device driver and the device are
functional. The program is menu driven.
Appendix E. Message Retrieval at the Host E-9

IBM TS3310 Specifications

General

Form Factor	Rack-mountable
Tape Technology	LTO Ultrium
Product Type	Tape Library
Interface	Fibre Channel
Expansion	Expandable with additional modules
Supported Tape Technology	LTO Ultrium 5, LTO Ultrium 6
Weight	120 lb (54.4 kg) (fully configured)
Power Supply	Dual redundant power supplies
Operating Temperature	41°F to 95°F (5°C to 35°C)
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)
Humidity	20% to 80% non-condensing