-SCS Parameter Analyzer Reference Manual Section 8: Keithley User Library Tool (KULT
4200A-901-01 Rev. C / February 2017 8-23
3. For the TwoTonesTwice user module, enter the following information in the Description tab
area:
<!--MarkdownExtra-->
<link rel="stylesheet" type="text/css"
href="http://clariusweb/HelpPane/stylesheet.css">
MODULE
======
TwoTonesTwice
DESCRIPTION
-----------
Execution results in sounding of four beeps at two alternating user-settable
frequencies. Each beeps sounds for 500 ms.
INPUTS
------
Freq1 (double) is the frequency, in Hz, of the first and third beep.
Freq2 (double) is the frequency, in Hz, of the second and fourth beep.
OUTPUTS
-------
None
RETURN VALUES
-------------
None
Figure 434: Description tab area
Continue with Saving the user module (on page 8-23).
Saving the user module
Select the File menu, then select Save Module.
Continue with Compiling the user module (on page 8-24
).